1. Only qualified technical personnel should perform maintenance to prevent fire or personal injury.
2. Use appropriate power cords. Only use power cords that are dedicated to this product and comply with its specifications.
3. Connect and disconnect correctly. Do not arbitrarily connect or disconnect test leads when they are connected to live terminals.
4. Ground the product. In addition to grounding through the power cord's grounding conductor, the grounding terminal on the product's enclosure must be grounded. To prevent electric shock, the grounding conductor must be connected to the earth. Before connecting to the product's input or output terminals, ensure that the product is properly grounded.
5. Pay attention to all terminal ratings. To prevent fire or electric shock hazards, pay attention to all ratings and markings of this product. Before connecting to this product, read the product's instruction manual to further understand the rating information.
6. Do not operate without the instrument cover. Do not operate this product if the cover or panel has been removed.
7. Use appropriate fuses. Only use fuses that comply with the specified type and rating for this product.
8. Avoid contact with exposed circuits and live metal. Do not touch exposed contacts and parts when the product is energized.
9. Do not operate if there is a suspected fault. If you suspect the product is damaged, have it inspected by maintenance personnel and do not continue operation.
10. After testing, wait for discharge to complete before removing test leads.
Product Introduction:
It is a specialized instrument for detecting the mechanical dynamic characteristics of high-voltage circuit breakers. The High Voltage Switch Dynamic Characteristic Tester adopts high-tech technology, integrating computer, printer, measurement interface circuit, and operating power supply into one unit. It is a new specialized instrument for high-voltage circuit breaker testing. It is equipped with two displacement sensors suitable for different distances and precision testing. The instrument's automatic identification system recognizes the selected sensor to complete distance and speed measurement for oil-minimum, oil-immersed, SF6, and vacuum high-voltage circuit breakers. In the instrument's design, only one closing (opening) operation is needed to sample and record all data of six break contacts. Measurement results can be displayed with a single key operation, and measurement data can be printed, including current waveform diagrams of six break contacts and a time characteristic curve of one moving contact.
It is a universal computer-based intelligent testing instrument developed for various high-voltage switches. The High Voltage Switch Characteristic Tester applies photoelectric pulse technology, single-chip computer technology, and reliable anti-electromagnetic radiation technology, equipped with precise and reliable speed/distance sensors. It can be used for debugging and measuring the mechanical parameters of various voltage levels of vacuum, SF6, oil-minimum, and oil-immersed high-voltage switches. The instrument is easy to wire and operate. Only one closing (opening) operation is needed to obtain all closing (opening) data. It can print all required data, break contact current waveforms, and moving contact motion curves for easy analysis and storage.
