GKC-F High-Voltage Switch Dynamic Characteristic Tester Uses * Measure the volt-ampere characteristics of linear resistive elements;
* Measure the forward and reverse volt-ampere characteristics of ordinary diodes;
* Measure the forward and reverse volt-ampere characteristics of Zener diodes;
* Measure the volt-ampere characteristics of small bulbs.
Technical Parameters and Features
* DC regulated power supply: Two ranges available, 2V and 20V, continuously adjustable, with 3.5-digit digital display;
* Voltage display: Range 0-200V, 3.5-digit digital display;
* Current display: Four ranges available: 200uA, 2mA, 20mA, 200mA, with 3.5-digit digital display;
* All use national standard connectors for manual wiring, which can cultivate hands-on ability.
GKC-F High-Voltage Switch Dynamic Characteristic Tester Also known as:
High-Voltage Switch Dynamic Characteristic Tester, Switch Mechanical Characteristic Tester, High-Voltage Switch Comprehensive Tester, Circuit Breaker Dynamic Characteristic Tester, Circuit Breaker Mechanical Characteristic Tester, Circuit Breaker Comprehensive Tester, High-Voltage Switch Timing Characteristic Tester, High-Voltage Switch Characteristic Tester, Switch Characteristic Tester, Circuit Breaker Tester, Switch Mechanical Characteristic Tester,
Main Uses: Suitable for mechanical characteristic testing of high-voltage circuit breakers from both imported and domestic manufacturers, including multi-oil, low-oil, SF6, vacuum, etc. Also suitable for time testing of electromagnetic action devices (such as contactors, relays, etc.).
Main Features: The instrument has a built-in DC operating power supply, and can flexibly use an external operating power supply or external synchronous trigger. Large-screen LCD display, with preset typical switch speed definitions; can switch to time waveform diagram to display 1 channel of close/open command, 12 channels of time transitions; S-T graph displays the close/open motion curve, with dynamic analysis and calculation; V-S curve allows intuitive observation of motion speed; I-T curve observes the electromagnet action process. Microcomputer printer prints data for retention. The instrument can save 255 test records, and can communicate with a computer; the data management software can analyze, correct, and print test reports. The accessory box is equipped with sensors such as 0.1mm, 1mm linear, 1-degree angle photoelectric auxiliary contacts, as well as test leads, speed measurement mounting brackets, and other complete accessories.
