ZX-CH Fully Automatic Capacitance and Inductance Tester



The ZX-CH Fully Automatic Capacitance and Inductance Tester can measure individual capacitors in a group of parallel-connected capacitors without disconnecting the wires. It can also measure the inductance of various reactors. This model of capacitance and inductance tester can also measure current under power frequency conditions. With convenient wiring and simple operation, it reduces the workload of maintenance personnel, greatly improves on-site testing efficiency, and provides safety assurance for the normal operation of the power grid.





Product Aliases

Fully Automatic Capacitance and Inductance Tester, Capacitance and Inductance Tester




Performance Features

1. This instrument can measure the individual capacitance of capacitors in a group of parallel-connected capacitors without disconnecting the wires (both single-phase and three-phase capacitors can be measured). At the same time, it can also measure the inductance of various reactors, meeting various on-site needs. For three-phase capacitance measurement, according to the connection method of the capacitor bank, wire once following the wiring diagram. The instrument has a built-in automatic phase-switching wiring function, eliminating tedious wiring, phase-switching, and short-circuiting operations. After the test, results are automatically generated.



2. During measurement, the instrument displays the measured capacitance or inductance value while also displaying data such as voltage, current, power, frequency, impedance, and phase angle, for better analysis of the test sample's condition.



3. The instrument adopts an 8.0-inch 800×600 graphic dot-matrix 65K color screen with touch operation, clear visibility both day and night, Chinese menu prompts, and easy operation.



4. The instrument has a built-in large-capacity lithium battery, with continuous working time of no less than 8 hours.



5. The instrument has a built-in large-capacity non-volatile memory: can store 200 sets of measurement data.



6. The instrument is equipped with a USB interface, which can store any number of measurement data sets (limited by USB capacity).



7. The instrument has a built-in high-precision real-time clock function: date and time calibration is possible.



8. The instrument comes with a high-speed micro thermal printer: can print measurement and historical data.



9. The instrument has overcurrent protection for the test power supply: short circuit of the power output will not damage the instrument.