1. Large LCD Chinese Display

The instrument is equipped with a large screen (105mm×65mm) Chinese menu interface, divided into left and right sections: the left side is the function menu area, and the right side provides relevant status information prompts. Each step is very clear, allowing operators to use it without professional training. With one operation, the microcomputer automatically completes the entire measurement process, making it an ideal dielectric loss measurement device currently.

2. Massive Data Storage

The instrument is equipped with a calendar chip and large-capacity memory, which can save test results in chronological order, allowing for viewing of historical records at any time and print output.

3. Scientific and Advanced Data Management

The instrument data can be exported via USB drive, and can be viewed and managed on any PC using our company's dedicated software, and can generate work reports.

4. Multiple Test Modes

The instrument can test using various methods such as internal high voltage, external high voltage, internal standard, external standard, positive connection, reverse connection, and self-excitation method; under external standard and external high voltage, it can perform high-voltage (greater than 10kV) dielectric loss measurements.

5. One-Step CVT Testing

This instrument can also test the dielectric loss and capacitance of C1 and C2 of fully sealed CVTs (capacitive voltage transformers), achieving simultaneous testing of C1 and C2. It can also test CVT ratio and voltage phase angle difference.

6. High-Speed Signal Sampling

The inverter and sampling circuits inside the instrument are fully digitally controlled, with continuously adjustable output voltage.

7. Multiple Protections for Safety and Reliability

The instrument has multiple protection measures such as input voltage fluctuation, output short circuit, overvoltage, overcurrent, and temperature, ensuring the instrument's safety and reliability. It also has a grounding detection function to ensure that ungrounded equipment is not allowed to boost voltage.